QViewing

Cue display and notes light for lighting designers.

Connect to your console

1. On the console: Setup ▸ System ▸ Show Control ▸ OSC — turn on OSC RX and OSC TX. Note the OSC TCP Mode and OSC TCP Server Port.
2. Put your iPhone on a network that can reach the console.
3. In QViewing: Settings ▸ enter the console IP, the same port (default 8000) and format (default OSC 1.1 (SLIP)) ▸ Connect.
4. Allow Local Network access when iOS asks.

White screen notes light

Press and hold anywhere for a white light. Keep holding and slide up or down to change brightness — it is remembered. Release to return to your cues.

Troubleshooting

• Stuck on “Connecting…” — the phone can't reach the console. Check the IP, the Wi-Fi network, and that the phone is not using a manual IP on the wrong subnet.
• “Connection refused” — the network is fine, but the port or OSC TCP mode doesn't match the console.
• Connected but no cues — make sure OSC TX is on and the TCP format matches.

Contact

Email: neilqiudesign@gmail.com

Privacy Policy · QViewing works with ETC Eos family consoles. ETC and Eos are trademarks of Electronic Theatre Controls, Inc. QViewing is not affiliated with or endorsed by ETC.